new name iSickBay.com




›The Process
Call toll free!!     1-877-iPod-Pro
Call toll free!!     1-877-476-3776


›iPhone Repairs
›iPod Touch Repairs
›iPod Nano Repairs:
›My Most Common iPod Repairs
›Other Items I Repair
›Ads I run on Craigslist
›Other Services & Info
Call toll free!!      1-877-iPod-Pro
Call toll free!!      1-877-IPOD-PRO


›1000's of Stories on Repairs I've done
     from all over the world


   ›Customer Comments on my work

   ›My Most Complex Patient *Ever*

›Tech Support - Tips and Instructions

4th Generation 20gb iPod Problems

I need to tell you that the 20GB drive in the 4th Generation iPods will be the weak point in that device for the rest of a 20GB 4th Gen's life. This includes the the black and white non-Photo iPod, the iPod with Color Display 20GB and the "U2 20GB iPod" in the Black case with Red dial. There are more problems and failures of the 20GB drive in these models than any other drive I've encountered, in or out of an iPod... and I've worked on computers since 1982 in 8 hardware environments using 12 operating systems. It seems to be a point of compromise, either by Apple in selecting that specific drive or the level of quality control used by the manufacturer. I've used the 40GB 4th generation personally... 3 to 5 hours a day for the past two years without any problems. My 4th Gen 40GB iPod is the same as the 20GB models except for the drive size... and mine has always worked

If I had a 20GB system of that vintage, here's what I would do:

When the 20GB failed, I would move onto a new 6th Gen Nano (not that I like *that* model Nano but the it's the best choice to make under the circumstance). I would buy it off the Apple website as a "refurbished" model (which it really isn't) and get it for about 1/3 off.

The drives in all of the 4th Generation models, both the monochrome (Black and White) and color (Photo) iPods use a 44 pin IDE connection on them. The drive industry abandoned that interface in real terms before the end of 2005. You should not be able to find a drive of that vintage that you could consider likely to work faithfully. They are all reaching their natural end of life. The IDE data bus these use has been replaced by the somewhat faster ATA bus plus the new drives use a zero insertion force connection allowing the drive in the 5th and 6th Gen video iPod to have a much slimmer profile. The ATA drives also spin at 4200 rpm instead of the 3200 RPM of the IDE version, this allows the drive to find the needed data one third faster as the disk latency drops because the seek time is reduced. If you have a 4th Gen model that has a failed drive, buy a 6th Gen version now.







Call 707-544-4400

or

email me at repair0121@isickbay.com with questions or to set up a repair.

HOURS:

Monday through Friday from 10am to 7pm, and Saturday & Sunday noon to 6pm.


I'm in Sonoma County... Northern California wine country,

    Frank Walburg
    Service Court
    Santa Rosa, Ca 95403-3139




Contact | About Me | Site Map | Links | Home
Copyright © 2004 - 2022, iSickBay. All rights reserved.